Control device・Option
Peripherals and various options that expand the range of use. There are many items that are not listed, so please contact us with your request.
Control device
-
BPU（Battery Power Unit）
A 24V DC motorized valve can be activated in the event of power loss.
It is possible to operate multiple actuators if it is a small to medium size actuator.
It can also be set to a mode that outputs by external signal input (seismologic etc.)
BPU（Battery Power Unit）
A 24V DC motorized valve can be activated in the event of power loss.
It is possible to operate multiple actuators if it is a small to medium size actuator.
It can also be set to a mode that outputs by external signal input (seismologic etc.)
Specification
Instruction manual
BPU series Battery Power Unit
-
VSC-SP（Split-range transmitter）
Split range control uses two sets of different control valves.
Built-in two modes, parallel characteristics and V type characteristic.
Operation start and operation end points can be set in 0.5mA increments
VSC-SP（Split-range transmitter）
Split range control uses two sets of different control valves.
Built-in two modes, parallel characteristics and V type characteristic.
Operation start and operation end points can be set in 0.5mA increments
Specification
Instruction manual
VSC-SP
-
VSC-2L（Linearizer）
A unit that converts the control signal to bring it closer to the optimum flow control.
It can be corrected according to the actual flow rate change.
Two proportional control valves can be controlled with one control signal.
By using two 2-way valves, more efficient diversion mixing control can be realized.
It is possible to correct the operating time of actuators with different operating times.
VSC-2L（Linearizer）
A unit that converts the control signal to bring it closer to the optimum flow control.
It can be corrected according to the actual flow rate change.
Two proportional control valves can be controlled with one control signal.
By using two 2-way valves, more efficient diversion mixing control can be realized.
It is possible to correct the operating time of actuators with different operating times.
Specification
Instruction manual
VSC-2L
-
VSC-AL（Alarm）
For the opening signal output from the proportional control actuator, contact output (no voltage) is performed when the set upper and lower limit opening is exceeded.
It can be used not only as an alarm but also for linked control with other devices.
VSC-AL（Alarm）
For the opening signal output from the proportional control actuator, contact output (no voltage) is performed when the set upper and lower limit opening is exceeded.
It can be used not only as an alarm but also for linked control with other devices.
Specification
Instruction manual
VSC-AL
-
MINI-PS（Signal conditioners）
Converts a wide range of voltages into a 24V DC power supply for the VSC series.
MINI-PS（Signal conditioners）
Converts a wide range of voltages into a 24V DC power supply for the VSC series.
Specification
Instruction manual
MINI-PS
BPU（Battery Power Unit）
A 24V DC motorized valve can be activated in the event of power loss.
It is possible to operate multiple actuators if it is a small to medium size actuator.
It can also be set to a mode that outputs by external signal input (seismologic etc.)
BPU（Battery Power Unit）
A 24V DC motorized valve can be activated in the event of power loss.
It is possible to operate multiple actuators if it is a small to medium size actuator.
It can also be set to a mode that outputs by external signal input (seismologic etc.)
| Specification | Instruction manual |
|---|---|
| BPU series Battery Power Unit |
VSC-SP（Split-range transmitter）
Split range control uses two sets of different control valves.
Built-in two modes, parallel characteristics and V type characteristic.
Operation start and operation end points can be set in 0.5mA increments
VSC-SP（Split-range transmitter）
Split range control uses two sets of different control valves.
Built-in two modes, parallel characteristics and V type characteristic.
Operation start and operation end points can be set in 0.5mA increments
| Specification | Instruction manual |
|---|---|
| VSC-SP |
VSC-2L（Linearizer）
A unit that converts the control signal to bring it closer to the optimum flow control.
It can be corrected according to the actual flow rate change.
Two proportional control valves can be controlled with one control signal.
By using two 2-way valves, more efficient diversion mixing control can be realized.
It is possible to correct the operating time of actuators with different operating times.
VSC-2L（Linearizer）
A unit that converts the control signal to bring it closer to the optimum flow control.
It can be corrected according to the actual flow rate change.
Two proportional control valves can be controlled with one control signal.
By using two 2-way valves, more efficient diversion mixing control can be realized.
It is possible to correct the operating time of actuators with different operating times.
| Specification | Instruction manual |
|---|---|
| VSC-2L |
VSC-AL（Alarm）
For the opening signal output from the proportional control actuator, contact output (no voltage) is performed when the set upper and lower limit opening is exceeded.
It can be used not only as an alarm but also for linked control with other devices.
VSC-AL（Alarm）
For the opening signal output from the proportional control actuator, contact output (no voltage) is performed when the set upper and lower limit opening is exceeded.
It can be used not only as an alarm but also for linked control with other devices.
| Specification | Instruction manual |
|---|---|
| VSC-AL |
MINI-PS（Signal conditioners）
Converts a wide range of voltages into a 24V DC power supply for the VSC series.
MINI-PS（Signal conditioners）
Converts a wide range of voltages into a 24V DC power supply for the VSC series.
| Specification | Instruction manual |
|---|---|
| MINI-PS |
CONTACTIf you have any questions or concerns,
please contact us first.
Selection request, document request, other inquiries